;------------------------------------------------------------------------------- ; ; ; PEEDI target configuration file for Freescale MAC7100 processor ; ; Ronetix ; ; Supported devices : MAC7100 ; ; Revision : 1.5 ; ; Date : March 23, 2007 ; ; The software is delivered "AS IS" without warranty or condition of any ; kind, either express, implied or statutory. This includes without ; limitation any warranty or condition with respect to merchantability or ; fitness for any particular purpose, or against the infringements of ; intellectual property rights of others. ; ;------------------------------------------------------------------------------- ;-------------------------------------------------------------------------- ; The following section contains licenses that are required for PEEDI to ; operate. These licenses must be filled before using this file. ; The [LICENSE] section may contain license keys for one or more PEEDIs. ; ; Example: ; [LICENSE] ; KEY = UPDATE_24MAY2010, 1111-1111-1111-1 ; KEY = XXXXX, 2222-2222-2222-2 ; ; The [LICENSE] section may point to an external file which contains ; license keys for one or more PEEDIs. The external file must include ; the text [LICENSE] followed by all keys. ; ; Example: ; [LICENSE] ; FILE = tftp://192.168.3.1/license.txt ; or ; FILE=eep:license.txt ; or ; FILE = ftp://user:password@192.168.3.1/license.txt ; ; ; PEEDI is shipped with license keys stored in "eep:license.txt" and ; printed on a label on the bottom side of PEEDI. ; [LICENSE] FILE=eep:license.txt ;-------------------------------------------------------------------------- [DEBUGGER] PROTOCOL = gdb_remote ; gdb remote REMOTE_PORT = 2000 ; TCP/IP port [TARGET] PLATFORM = ARM ; platform is ARM [PLATFORM_ARM] JTAG_CHAIN = 4 ; list of IR length of all TAP controller in JTAG chain JTAG_CLOCK = 20, 4000 ; JTAG Clock in [kHz] - 10kHz jtag clock for init operations and 4MHz for normal work ; Freescale recommends max JTAG_CLOCK 1/6 of the system clock TRST_TYPE = OPENDRAIN ; type of TRST output: OPENDRAIN or PUSHPULL RESET_TIME = 20 ; 20ms reset pulse, 0 means no reset TIME_AFTER_RESET = 100 ; time between releasing the reset and starting the jtag communication CORE0 = MAC7100 ; TAP is Freescale MAC71xx CPU CORE0_STARTUP_MODE = RESET ; startup mode after reset: ; if RESET than no code is executed after reset ; if STOP,XX then the target executes code for XX period in ms. ; if RUN then the target executes code until stopped by the telnet "halt" command CORE0_BREAKMODE = soft ; breakpoint mode: ; soft - software breakpiont ; hard - use hardware breakpoints instead of software CORE0_BREAK_PATTERN = 0xDFFFDFFF ; software breakpoint pattern CORE0_INIT = INIT_MAC7100 ; init section for MAC7100 board CORE0_FLASH0 = FLASH_PROG ; PROGRAM flash section parameters CORE0_ENDIAN = BIG ; core is big endian CORE0_WORKSPACE_ADDR = 0x40000100 ; start address of workspace for flash programmer CORE0_WORKSPACE_LEN = 0x4000 ; length of workspace in bytes CORE0_LOCKOUT_RECOVERY = 19 ; If this parameter is present, PEEDI automatically executes a ; "JTAG Lockout Recovery" procedure during reset processing ; if the MAC7100 flash is secured ; Fsys 4MHz CLKD=9; Fsys 8MHz CLKD=19 CORE0_FILE = "myfile.bin", BIN, 0x40000100 ; default file CORE0_PATH = "tftp://192.168.3.60" ; default path [INIT_MAC7100] memory write8 0xfc088004 0 ; CRGINT Disable clock interrupts ; Speed-up to fsys = 50MHz, Fsys = 2*Fosc*(mul/div) ; Quartz is 8.00 MHz ;-------------------------------------------------- memory write8 0xfc088001 0x07 ; REFDV - CRG Reference Divider register - divide by 8 memory write8 0xfc088000 0x18 ; SYNR - CRG synthesizer Register - multiply by 25 wait 10 memory write8 0xfc088005 0x80 ; CLKSEL - Select fsys=PLLCLK memory write8 0xFC088003 0x72 ; clear the flags memory write8 0xfc088008 0x00 ; BDMCTL - SWT and RTI keep running in debug mode memory write16 0xfc0e80c4 0x0080 ; output CLKOUT on PD2 set pc 0x40000000 ; set PC to RAM memory base [FLASH_PROG] CHIP = MAC7100 ; flash chip CPU_CLOCK = 50000 ; PLL clock CHECK_ID = YES FILE = "test256k.bin", BIN, 0xFC100800 ; file to program AUTO_ERASE = NO ; erase before program [SERIAL] ; serial port configuration BAUD = 115200 STOP_BITS = 1 PARITY = NONE TCP_PORT = 0 ; enable CLI over RS232 ;TCP_PORT = 2023 ; enable serial over TCP/IP [TELNET] PROMPT = "MAC7100> " ; telnet prompt ;BACKSPACE = 127 ; comment out for autodetect [DISPLAY] BRIGHTNESS = 20 ; LED indicator brightness VOLUME = 25 ; zummer volume [ACTIONS] ; user defined scripts 1 = erase 2 = prog 3 = dump_ram 4 = dump_flash [erase] ; erase flash flash erase [prog] ; program flash flash prog