;------------------------------------------------------------------------------- ; ; avr32uc.cfg ; ----------- ; ; PEEDI target configuration file for ALVIDI AT32UC3A1512 evaluation board ; ; ; Ronetix ; ; Supported devices : AT32UC3A1512 ; ; Revision : 1.0 ; ; Date : June 3, 2009 ; ; The file is delivered "AS IS" without warranty or condition of any ; kind, either express, implied or statutory. This includes without ; limitation any warranty or condition with respect to merchantability or ; fitness for any particular purpose, or against the infringements of ; intellectual property rights of others. ; ;------------------------------------------------------------------------------- ;-------------------------------------------------------------------------- ; The following section contains licenses that are required for PEEDI to ; operate. These licenses must be filled before using this file. ; The [LICENSE] section may contain license keys for one or more PEEDIs. ; ; Example: ; [LICENSE] ; KEY = UPDATE_24MAY2010, 1111-1111-1111-1 ; KEY = XXXXX, 2222-2222-2222-2 ; ; The [LICENSE] section may point to an external file which contains ; license keys for one or more PEEDIs. The external file must include ; the text [LICENSE] followed by all keys. ; ; Example: ; [LICENSE] ; FILE = tftp://192.168.3.1/license.txt ; or ; FILE=eep:license.txt ; or ; FILE = ftp://user:password@192.168.3.1/license.txt ; ; ; PEEDI is shipped with license keys stored in "eep:license.txt" and ; printed on a label on the bottom side of PEEDI. ; [LICENSE] FILE=eep:license.txt ;-------------------------------------------------------------------------- [DEBUGGER] REMOTE_PORT = 2000 ; TCP/IP port [TARGET] PLATFORM = AVR32 ; platform is [PLATFORM_AVR32] JTAG_CHAIN = 5 ; list of IR lenght of all TAP controller in JTAG chain JTAG_CLOCK = 1000 ; JTAG Clock in [kHz] - 100kHz jtag clock for init operations and 8MHz for normal work TRST_TYPE = PUSHPULL ; type of TRST output: OPENDRAIN or PUSHPULL RESET_TIME = 20 ; lenght of RESET pulse in ms; 0 means no RESET WAKEUP_TIME = 200 TIME_AFTER_RESET = 200 CORE0 = AVR32UC3 ; TAP is AVR32UC CPU CORE0_STARTUP_MODE = RESET CORE0_BREAKMODE = SOFT ; breakpoint mode: ; soft - software breakpiont ; hard - use hardware breakpoints instead of software CORE0_LOCKOUT_RECOVERY = NO ; do not erase chip if secured CORE0_USE_BLOCK_ACCESS = NO ; NO or ADDRESS, LENGTH CORE0_INIT = INIT_AVR32UC ; init section CORE0_FLASH0 = FLASH_AVR32UC ; flash section parameters CORE0_ENDIAN = BIG ; core is big endian CORE0_PATH = "tftp://192.168.3.60" CORE0_FILE = "test32k.bin" [INIT_AVR32UC] [FLASH_AVR32UC] CHIP = AT32UC FLASH_SIZE = 512 ; Flash size in Kbytes FILE = "test256k.bin", bin, 0x80000000 [SERIAL] ; serial port configuration BAUD = 115200 STOP_BITS = 1 PARITY = NONE TCP_PORT = 0 [TELNET] PROMPT = "avr32uc> " ; telnet prompt ;BACKSPACE = 127 ; comment out for autodetect [DISPLAY] BRIGHTNESS = 20 ; LED indicator brightness VOLUME = 25 ; zummer volume [ACTIONS] ; user defined scripts 1 = erase 2 = prog [erase] ; erase flash flash erase [prog] ; program flash flash program