;-------------------------------------------------------------------------- ; ; ; PEEDI sample target configuration file ; ; Ronetix GmbH ; ; Supported devices : Analog Devices ADZS-SC589 ; Supported board : ADZS-SC589-MINI ; ; Note: ; The JTAG pinout on the board is not standard. ; P1.9 on the board is TRST. ; ; Date : Sep 24, 2020 ; ; Note: ; ; The file is delivered "AS IS" without warranty or condition of any ; kind, either express, implied or statutory. This includes without ; limitation any warranty or condition with respect to merchantability or ; fitness for any particular purpose, or against the infringements of ; intellectual property rights of others. ; ;-------------------------------------------------------------------------- ;-------------------------------------------------------------------------- ; The following section contains licenses that are required for PEEDI to ; operate. These licenses must be filled before using this file. ; The [LICENSE] section may contain license keys for one or more PEEDIs. ; ; Example: ; [LICENSE] ; KEY = UPDATE_24MAY2013, 1111-1111-1111-1 ; KEY = XXXXX, 2222-2222-2222-2 ; ; The [LICENSE] section may point to an external file which contains ; license keys for one or more PEEDIs. The external file must include ; the text [LICENSE] followed by all keys. ; ; Example: ; [LICENSE] ; FILE = tftp://192.168.1.1/license.txt ; or ; FILE=eep:license.txt ; or ; FILE = ftp://user:password@192.168.1.1/license.txt ; ; ; PEEDI is shipped with license keys stored in "eep:license.txt" and ; printed on a label on the bottom side of PEEDI. ; [LICENSE] FILE = eep:license.txt ;-------------------------------------------------------------------------- [DEBUGGER] PROTOCOL = gdb_remote ; gdb remote REMOTE_PORT = 2000 ; TCP/IP port [TARGET] PLATFORM = Cortex [PLATFORM_Cortex] JTAG_CHAIN = 5, 4 ; list of TAP controllers in the JTAG chain JTAG_CLOCK = 8000 ; JTAG Clock in [kHz] TRST_TYPE = PUSHPULL ; type of TRST output: OPENDRAIN or PUSHPULL RESET_TYPE = ADSP-SC5xx RESET_TIME = 20 ; length of RESET pulse in ms WAKEUP_TIME = 20 ; delay after power up TIME_AFTER_RESET = 200 ; delay after RST is released ; CORE0_KEY = 0x12, 0x34, 0x56, 0x78 CORE0 = MEM-AP, 1, 0 ; TAP 1, ID 0 CORE0_APSEL = 0 ; AHB access port CORE0_INIT = INIT_MEM_AP CORE1 = Cortex-A, 1, 0x4BA00477 CORE1_STARTUP_MODE = RESET ; stop the core immediately after reset CORE1_ENDIAN = LITTLE ; core is little endian CORE1_BREAKMODE = SOFT ; breakpoint mode CORE1_DEBUG_ADDR = 0x80020000, 0x80028000 ; CoreSight Debug component CORE1_INIT = INIT_ADSP_SC589 CORE1_WORKSPACE = 0x20080000, 0x8000 ; address, size in bytes CORE1_FLASH0 = QSPI_FLASH CORE1_PATH = "tftp://192.168.3.60" CORE1_FILE = "test.bin", BIN, 0x20000000 [INIT_ADSP_SC589] [INIT_MEM_AP] mem read 0x31130000 ; TAPC_IDCODE - read just for test mem write 0x31131000 0xFFFF ; TAPC0_DBGCTL - enable debug [QSPI_FLASH] ; currently not supported [SERIAL] ; serial port configuration BAUD = 115200 STOP_BITS = 1 PARITY = NONE TCP_PORT = 0 [TELNET] PROMPT = "adsp_sc589> " ; telnet prompt DEFAULT_CORE = 1 ; use CORE1 by default [DISPLAY] BRIGHTNESS = 20 ; LED indicator brightness VOLUME = 25 ; beeper volume [ACTIONS] ; user defined scripts ;AUTORUN = 2 ; executed on every target connect 1 = erase 2 = prog [erase] ; erase flash flash erase [prog] ; program flash flash prog