;--------------------------------------------------------------------------
;
;
;   PEEDI sample target configuration file
;
;   Ronetix GmbH
;
;   Supported devices   : Freescale LS1012A -  Cortex A53
;   Supported board     : FRDM-LS1012A
;	Note				: Don't confuse LS1012A and K20 JTAG connectors 
;	
;   Revision            : 1.0
;
;   Date                : Januar 17, 2017
;
; The file is delivered "AS IS" without warranty or condition of any
; kind, either express, implied or statutory. This includes without
; limitation any warranty or condition with respect to merchantability or
; fitness for any particular purpose, or against the infringements of
; intellectual property rights of others.
;
;--------------------------------------------------------------------------

;--------------------------------------------------------------------------
; The following section contains licenses that are required for PEEDI to
; operate. These licenses must be filled before using this file.
; The [LICENSE] section may contain license keys for one or more PEEDIs.
;
;   Example:
;       [LICENSE]
;       KEY         = UPDATE_24MAY2013, 1111-1111-1111-1
;       KEY         = XXXXX, 2222-2222-2222-2
;
; The [LICENSE] section may point to an external file which contains
; license keys for one or more PEEDIs. The external file must include 
; the text [LICENSE] followed by all keys.
;
;   Example:
;		[LICENSE]
;		FILE = tftp://192.168.1.1/license.txt
;		or
;		FILE=eep:license.txt 
;		or 
;		FILE = ftp://user:password@192.168.1.1/license.txt
;
;
; PEEDI is shipped with license keys stored in "eep:license.txt" and 
; printed on a label on the bottom side of PEEDI.
;
[LICENSE]
FILE = eep:license.txt
;--------------------------------------------------------------------------

[DEBUGGER]
PROTOCOL                = gdb_remote    ; gdb remote
REMOTE_PORT             = 2000          ; TCP/IP port

[TARGET]
PLATFORM                = Cortex-A      ; platform is Cortex-A

[PLATFORM_Cortex-A]
JTAG_CHAIN              = 8,4       	; list of TAP controllers in the JTAG chain
JTAG_CLOCK              = 10000    		; JTAG Clock in [kHz]
TRST_TYPE               = PUSHPULL      ; type of TRST output: OPENDRAIN or PUSHPULL
RESET_TIME              = 20            ; length of RESET pulse in ms
RESET_TYPE				= LS1012A
RCW_SRC                 = 0x9E			; override RCW source (use hard coded)
WAKEUP_TIME         	= 200          	; delay after power up
VERBOSE_INFO			= 1
CORE0_DEBUG_ADDR 		= 0x80410000, 0x80420000	; CoreSight Debug and CrossTrigger components

CORE0                   = LS1000_x64, 1, 0x5BA00477 ; TAP is Cortex-A CPU
CORE0_STARTUP_MODE      = RESET         ; stop the core immediately after reset
CORE0_ENDIAN            = LITTLE        ; core is little endian
CORE0_BREAKMODE         = SOFT          ; breakpoint mode
CORE0_INIT              = INIT_LS1012A
CORE0_WORKSPACE         = 0x10000000, 0x8000   ; address, lenght in bytes
CORE0_FLASH0			= QSPI_FLASH
CORE0_PATH  			= "tftp://192.168.3.60"
CORE0_FILE  			= "test.bin", BIN, 0x20000000

[INIT_LS1012A]


[QSPI_FLASH]
CHIP 		= SPI25_FLASH
CPU 		= FSL_QSPI_LS1012A
SPI_CS 		= 0
FILE 		= "ls1012a_rcw.bin" 0

[SERIAL]                            ; serial port configuration
BAUD            = 115200
STOP_BITS       = 1
PARITY          = NONE
TCP_PORT        = 0

[TELNET]
PROMPT          = "ls1012a> "         ; telnet prompt
;BACKSPACE      = 127               ; comment out for autodetect

[DISPLAY]
BRIGHTNESS      = 20                ; LED indicator brightness
VOLUME          = 25                ; beeper volume

[ACTIONS]                           ; user defined scripts
;AUTORUN        = 2                 ; executed on every target connect