;--------------------------------------------------------------------------
;   PEEDI sample target configuration file
;
;   Ronetix GmbH
;
;   Supported devices   : Freescale i.MX93
;   Supported board     : RNX-iMX93-OSM
;
;   0x00000000 - 256 KB, Boot ROM
;   0x20480000 - 640 KB, OCRAM
;   0x80000000 -   1 GB, DDR
;
;   Date                : Nov 22, 2023
;
;
; The file is delivered "AS IS" without warranty or condition of any
; kind, either express, implied or statutory. This includes without
; limitation any warranty or condition with respect to merchantability or
; fitness for any particular purpose, or against the infringements of
; intellectual property rights of others.
;
;--------------------------------------------------------------------------

;--------------------------------------------------------------------------
; The following section contains licenses that are required for PEEDI to
; operate. These licenses must be filled before using this file.
; The [LICENSE] section may contain license keys for one or more PEEDIs.
;
;   Example:
;       [LICENSE]
;       KEY         = UPDATE_24MAY2013, 1111-1111-1111-1
;       KEY         = XXXXX, 2222-2222-2222-2
;
; The [LICENSE] section may point to an external file which contains
; license keys for one or more PEEDIs. The external file must include
; the text [LICENSE] followed by all keys.
;
;   Example:
;       [LICENSE]
;       FILE = tftp://192.168.1.1/license.txt
;       or
;       FILE=eep:license.txt
;       or
;       FILE = ftp://user:password@192.168.1.1/license.txt
;
;
; PEEDI is shipped with license keys stored in "eep:license.txt" and
; printed on a label on the bottom side of PEEDI.
;
[LICENSE]
FILE = eep:license.txt
;--------------------------------------------------------------------------

[DEBUGGER]
PROTOCOL            = gdb_remote    ; gdb remote
REMOTE_PORT         = 2000          ; TCP/IP port

[TARGET]
PLATFORM            = Cortex

[PLATFORM_Cortex]
JTAG_CHAIN          = 4             ; list of TAP controllers in the JTAG chain
JTAG_CLOCK          = 2000          ; JTAG Clock in [kHz]
TRST_TYPE           = PUSHPULL      ; type of TRST output: OPENDRAIN or PUSHPULL
RESET_TIME          = 20            ; length of RESET pulse in ms
WAKEUP_TIME         = 200            ; delay after power up
TIME_AFTER_RESET    = 200          ; delay after RST is released
;CORE0_VERBOSE_INFO  = 1             ; print info
CORE0_DEBUG_ADDR    = 0x80810000, 0x80820000    ; CoreSight Debug component
CORE0               = Cortex-ARMv8_AMP, 0, 0x5BA00477   ; TAP is Cortex-A CPU
CORE0_STARTUP_MODE  = RESET         ; stop the core immediately after reset
CORE0_ENDIAN        = LITTLE        ; core is little endian
CORE0_BREAKMODE     = SOFT          ; breakpoint mode
CORE0_INIT          = INIT_MX93
CORE0_WORKSPACE     = 0x20480000, 0x10000    ; OCRAM
CORE0_FLASH0        = FLASH_EMMC
CORE0_PATH          = "tftp://192.168.3.5"

[]
CORE1               = Cortex-ARMv8_AMP, 0, 0x5BA00477
CORE1_DEBUG_ADDR    = 0x80910000, 0x80920000
CORE1_PATH          = "tftp://192.168.3.5"


[INIT_MX93]


; 22.11.2023 - only "flash info" is working. 
; Pinmux setup is required 
[FLASH_EMMC]
CHIP    = CARD
CPU     = iMX93
VDD		= 1800		; 1.8V
SDHC 	= 1			; SD1, eMMC
CHIP_WIDTH = 8
FILE    = "test256k.bin", bin, 2

[SERIAL]                            ; serial port configuration
BAUD            = 115200
STOP_BITS       = 1
PARITY          = NONE
TCP_PORT        = 0

[TELNET]
PROMPT          = "imx93> "         ; telnet prompt
;BACKSPACE      = 127               ; comment out for autodetect

[DISPLAY]
BRIGHTNESS      = 20                ; LED indicator brightness
VOLUME          = 25                ; beeper volume

[ACTIONS]                           ; user defined scripts
;AUTORUN        = 2                 ; executed on every target connect
1 = erase
2 = prog

[erase]                             ; erase flash
flash erase

[prog]                              ; program flash
flash prog