;-------------------------------------------------------------------------- ; ; ; PEEDI sample target configuration file ; ; Ronetix GmbH ; ; Supported devices : STEricsson U8500 ; Supported board : Snowball ; ; Revision : 1.0 ; ; Date : November 9, 2012 ; ; The file is delivered "AS IS" without warranty or condition of any ; kind, either express, implied or statutory. This includes without ; limitation any warranty or condition with respect to merchantability or ; fitness for any particular purpose, or against the infringements of ; intellectual property rights of others. ; ;-------------------------------------------------------------------------- ;-------------------------------------------------------------------------- ; The following section contains licenses that are required for PEEDI to ; operate. These licenses must be filled before using this file. ; The [LICENSE] section may contain license keys for one or more PEEDIs. ; ; Example: ; [LICENSE] ; KEY = UPDATE_24MAY2010, 1111-1111-1111-1 ; KEY = XXXXX, 2222-2222-2222-2 ; ; The [LICENSE] section may point to an external file which contains ; license keys for one or more PEEDIs. The external file must include ; the text [LICENSE] followed by all keys. ; ; Example: ; [LICENSE] ; FILE = tftp://192.168.3.1/license.txt ; or ; FILE=eep:license.txt ; or ; FILE = ftp://user:password@192.168.3.1/license.txt ; ; ; PEEDI is shipped with license keys stored in "eep:license.txt" and ; printed on a label on the bottom side of PEEDI. ; [LICENSE] FILE = eep:license.txt ;-------------------------------------------------------------------------- [DEBUGGER] PROTOCOL = gdb_remote ; gdb remote REMOTE_PORT = 2000 ; TCP/IP port [TARGET] PLATFORM = CORTEX [PLATFORM_CORTEX] JTAG_CHAIN = 6, 4 ; list of TAP controllers in the JTAG chain JTAG_CLOCK = 100, 5000 ; JTAG Clock in [kHz] TRST_TYPE = PUSHPULL ; type of TRST output: OPENDRAIN or PUSHPULL RESET_TIME = 20 ; length of RESET pulse in ms; 0 means no RESET CORE0 = U8500, 1, 0xBA00477 CORE0_STARTUP_MODE = RESET ; stop the core immediately after reset CORE0_ENDIAN = LITTLE ; core is little endian CORE0_BREAKMODE = SOFT ; breakpoint mode CORE0_INIT = INIT_LINUX ; init section with booting Linux CORE0_WORKSPACE = 0x1FFE0000, 0x20000 ;CORE_VECTOR_CATCH_MASK = 0xFE00FCFF ; catch all vectors ; Default path to be used if only a file name (without the full path) is ; provided to a PEEDI command or for the FILE parameter in the Flash sections ; Examples: ; In a console: ; "flash prog tftp://192.168.3.1/image.elf" ; is equal to ; "flash prog image.elf" ; ; In a Flash Profile: ; FILE="tftp://192.168.3.1/image.bin", BIN, 0 ; is equal to ; FILE="image.bin", BIN, 0 ; CORE0_PATH = "tftp://192.168.3.60" ;CORE0_PATH = "card://" CORE0_FILE = "test.bin", BIN, 0x20000000 ;CORE1 = U8500, 1, 0x1BA00477 ; TAP is i.MX51 CPU ;CORE1_STARTUP_MODE = RESET ; stop the core immediately after reset ;CORE1_ENDIAN = LITTLE ; core is little endian ;CORE1_BREAKMODE = SOFT ; breakpoint mode [INIT_LINUX] break add hard 0xC00087A0 ; kernel break address got by 'nm vmlinux | grep start_kernel' go wait 20000 stop break del all beep 100 100 [SERIAL] ; serial port configuration BAUD = 115200 STOP_BITS = 1 PARITY = NONE TCP_PORT = 0 [TELNET] PROMPT = "u8500> " ; telnet prompt ;BACKSPACE = 127 ; comment out for autodetect [DISPLAY] BRIGHTNESS = 20 ; LED indicator brightness VOLUME = 25 ; beeper volume [ACTIONS] ; user defined scripts ;AUTORUN = 2 ; executed on every target connect 1 = erase 2 = prog [erase] ; erase flash flash erase [prog] ; program flash flash prog