;--------------------------------------------------------------------------
;
;
;   PEEDI sample target configuration file
;
;   Ronetix
;
;   Supported devices   : Actel A2F200
;
;   Revision            : 1.0
;
;   Date                : September 10, 2010
;
; The file is delivered "AS IS" without warranty or condition of any
; kind, either express, implied or statutory. This includes without
; limitation any warranty or condition with respect to merchantability or
; fitness for any particular purpose, or against the infringements of
; intellectual property rights of others.
;
;--------------------------------------------------------------------------

;--------------------------------------------------------------------------
; The following section contains licenses that are required for PEEDI to
; operate. These licenses must be filled before using this file.
; The [LICENSE] section may contain license keys for one or more PEEDIs.
;
;   Example:
;       [LICENSE]
;       KEY         = UPDATE_24MAY2010, 1111-1111-1111-1
;       KEY         = XXXXX, 2222-2222-2222-2
;
; The [LICENSE] section may point to an external file which contains
; license keys for one or more PEEDIs. The external file must include 
; the text [LICENSE] followed by all keys.
;
;   Example:
;       [LICENSE]
;       FILE = tftp://192.168.3.1/license.txt
;       or
;       FILE=eep:license.txt 
;       or 
;       FILE = ftp://user:password@192.168.3.1/license.txt
;
;
; PEEDI is shipped with license keys stored in "eep:license.txt" and 
; printed on a label on the bottom side of PEEDI.
;
[LICENSE]
FILE = eep://license.txt
;--------------------------------------------------------------------------

[DEBUGGER]
PROTOCOL                = gdb_remote ; gdb remote
REMOTE_PORT             = 2000      ; TCP/IP port

[TARGET]
PLATFORM                = CortexM3  ; platform is CortexM3

[PLATFORM_CortexM3]
JTAG_CHAIN              = 4         ; list of TAP controllers in the JTAG chain
JTAG_CLOCK              = 100, 5000 ; JTAG Clock in [kHz]
TRST_TYPE               = PUSHPULL  ; type of TRST output: OPENDRAIN or PUSHPULL
RESET_TIME              = 0         ; length of RESET pulse in ms; 0 means no RESET
CORE0                   = Cortex-M  ; TAP is CortexM3  CPU
CORE0_STARTUP_MODE      = RESET     ; stop the core immediately after reset
CORE0_ENDIAN            = LITTLE    ; core is little endian
CORE0_BREAKMODE         = SOFT      ; breakpoint mode
CORE0_INIT              = INIT_A2F  ; init section for A2F200 
CORE0_FLASH             = FLASH_A2F ; FLASH section parameters
CORE0_WORKSPACE         = 0x20000000, 0x10000 ; workspace for FLASH programmer
CORE0_PATH  			= "tftp://192.168.3.1"	; default path

[INIT_A2F]

[FLASH_A2F]
CHIP            = A2F200            ; flash chip
ACCESS_METHOD   = AGENT
AUTO_ERASE      = NO                ; erase before program
FILE            = "test32k.bin" 0x60000000 ; file to program

[SERIAL]                            ; serial port configuration
BAUD            = 115200
STOP_BITS       = 1
PARITY          = NONE
TCP_PORT        = 0

[TELNET]
PROMPT          = "a2f> "         ; telnet prompt
;BACKSPACE      = 127               ; comment out for autodetect

[DISPLAY]
BRIGHTNESS      = 20                ; LED indicator brightness
VOLUME          = 25                ; beeper volume

[ACTIONS]                           ; user defined scripts
;AUTORUN        = 2                 ; executed on every target connect
1 = erase
2 = prog
3 = dump_ram
4 = dump_flash

[erase]                             ; erase flash
flash erase

[prog]                              ; program flash
flash prog