;--------------------------------------------------------------------------
;
;
;   PEEDI sample target configuration file
;
;   Ronetix GmbH
;
;   Supported devices   : AR6001XL
;
;   Revision            : 1.2
;
;   Date                : May 27, 2010
;
; The file is delivered "AS IS" without warranty or condition of any
; kind, either express, implied or statutory. This includes without
; limitation any warranty or condition with respect to merchantability or
; fitness for any particular purpose, or against the infringements of
; intellectual property rights of others.
;
;--------------------------------------------------------------------------

;--------------------------------------------------------------------------
; The following section contains licenses that are required for PEEDI to
; operate. These licenses must be filled before using this file.
; The [LICENSE] section may contain license keys for one or more PEEDIs.
;
;   Example:
;       [LICENSE]
;       KEY         = UPDATE_24MAY2010, 1111-1111-1111-1
;       KEY         = XXXXX, 2222-2222-2222-2
;
; The [LICENSE] section may point to an external file which contains
; license keys for one or more PEEDIs. The external file must include 
; the text [LICENSE] followed by all keys.
;
;   Example:
;		[LICENSE]
;		FILE = tftp://192.168.3.1/license.txt
;		or
;		FILE=eep:license.txt 
;		or 
;		FILE = ftp://user:password@192.168.3.1/license.txt
;
;
; PEEDI is shipped with license keys stored in "eep:license.txt" and 
; printed on a label on the bottom side of PEEDI.
;
[LICENSE]
FILE=eep:license.txt
;--------------------------------------------------------------------------

[DEBUGGER]
PROTOCOL                = gdb_remote    ; gdb remote
REMOTE_PORT             = 2000          ; TCP/IP port
GDB_READ_INGNORE_TIME   = 3000

[TARGET]
PLATFORM                = MIPS32        ; platform is MIPS32

[PLATFORM_MIPS32]
JTAG_CHAIN              = 5             ; list of TAP controllers in the JTAG chain
JTAG_CLOCK              = 20000          ; JTAG Clock in [kHz]
TRST_TYPE               = PUSHPULL      ; type of TRST output: OPENDRAIN or PUSHPULL
RESET_TIME              = 0                ; length of RESET pulse in ms; 0 means no RESET
WAKEUP_TIME             = 500
CORE0                   = MIPS32_4K, 0, 1; TAP is MIPS32 4K CPU
CORE0_STARTUP_MODE      = RESET         ; stop the core immediately after reset
CORE0_ENDIAN            = LITTLE        ; core is little endian
CORE0_BREAKMODE         = soft          ; breakpoint mode
CORE0_INIT              = INIT_MIPS     ; init section
CORE0_WORKSPACE         = 0xA0000000, 0x11000
CORE_FLASH0             = FLASH_NOR

[INIT_MIPS]
; disable cache
set config 0x2

; Configure Bank 0/ Flash- access time =150ns assuming 40Mhz clock
mem write 0xc004000 0xc2000000
mem write 0xc004004 0x92020071
mem write 0xc004008 0x02770871
mem write 0xc00400c 0x02770171

; Configure Bank1/SRAM - access time =150ns assuming 40MHz clock
mem write 0xc004010 0xc4000000
mem write 0xc004014 0x92020071
mem write 0xc004018 0x02770871
mem write 0xc00401c 0x02770171

; AR6000 feature overrides:
;   bit 0 - disable BMI
;   bit 1 - force enable serial port output
;   bit 2 - disable WatchDog Timer
;   bit 3 - disable system sleep
mem write 0xac0140c0 0x8

[FLASH_NOR]
CHIP            = AR6001XL
ACCESS_METHOD   = AGENT
CHECK_ID        = YES
CHIP_WIDTH      = 16
CHIP_COUNT      = 1
BASE_ADDR       = 0xA2000000
FILE            = "tftp://192.168.3.1/test512k.bin", BIN, 0xA2000000
AUTO_ERASE      = NO

[SERIAL]                            ; serial port configuration
BAUD            = 115200
STOP_BITS       = 1
PARITY          = NONE
TCP_PORT        = 0

[TELNET]
PROMPT          = "ar6001> "        ; telnet prompt
;BACKSPACE      = 127               ; comment out for autodetect

[DISPLAY]
BRIGHTNESS      = 20                ; LED indicator brightness
VOLUME          = 25                ; beeper volume