;-------------------------------------------------------------------------- ; ; ; PEEDI sample target configuration file ; ; Ronetix ; ; Supported devices : PIC32 ; ; Revision : 1.0 ; ; Date : October 7, 2009 ; ; The file is delivered "AS IS" without warranty or condition of any ; kind, either express, implied or statutory. This includes without ; limitation any warranty or condition with respect to merchantability or ; fitness for any particular purpose, or against the infringements of ; intellectual property rights of others. ; ;-------------------------------------------------------------------------- ;-------------------------------------------------------------------------- ; The following section contains licenses that are required for PEEDI to ; operate. These licenses must be filled before using this file. ; The [LICENSE] section may contain license keys for one or more PEEDIs. ; ; Example: ; [LICENSE] ; KEY = UPDATE_24MAY2010, 1111-1111-1111-1 ; KEY = XXXXX, 2222-2222-2222-2 ; ; The [LICENSE] section may point to an external file which contains ; license keys for one or more PEEDIs. The external file must include ; the text [LICENSE] followed by all keys. ; ; Example: ; [LICENSE] ; FILE = tftp://192.168.3.1/license.txt ; or ; FILE=eep:license.txt ; or ; FILE = ftp://user:password@192.168.3.1/license.txt ; ; ; PEEDI is shipped with license keys stored in "eep:license.txt" and ; printed on a label on the bottom side of PEEDI. ; [LICENSE] FILE=eep:license.txt ;-------------------------------------------------------------------------- [DEBUGGER] PROTOCOL = gdb_remote ; gdb remote REMOTE_PORT = 2000 ; TCP/IP port GDB_READ_INGNORE_TIME = 3000 [TARGET] PLATFORM = MIPS32 ; platform is MIPS32 [PLATFORM_MIPS32] JTAG_CHAIN = 5 ; list of TAP controllers in the JTAG chain JTAG_CLOCK = 1000 ; JTAG Clock in [kHz] TRST_TYPE = PUSHPULL ; type of TRST output: OPENDRAIN or PUSHPULL RESET_TIME = 100 ; length of RESET pulse in ms; 0 means no RESET WAKEUP_TIME = 100 CORE0 = PIC32 ; TAP is PIC32 CPU CORE0_STARTUP_MODE = RESET ; stop the core immediately after reset CORE0_ENDIAN = LITTLE ; core is little endian CORE0_BREAKMODE = soft ; breakpoint mode CORE0_INIT = INIT_MIPS ; init section CORE0_FLASH0 = BOOT_FLASH ; FLASH section parameters CORE0_FLASH1 = PROGRAM_FLASH ; FLASH section parameters CORE0_WORKSPACE = 0x00000000, 0x8000 [INIT_MIPS] ; init CPU registers if needs [BOOT_FLASH] CHIP = PIC32_BOOT ACCESS_METHOD = DIRECT FILE = ftp://user:password@192.168.0.10/x.bin 0 [PROGRAM_FLASH] CHIP = PIC32_PROGRAM ACCESS_METHOD = AGENT FILE = ftp://user:password@192.168.0.10/x.bin 0 [SERIAL] ; serial port configuration BAUD = 115200 STOP_BITS = 1 PARITY = NONE TCP_PORT = 0 [TELNET] PROMPT = "pic32> " ; telnet prompt ;BACKSPACE = 127 ; comment out for autodetect [DISPLAY] BRIGHTNESS = 20 ; LED indicator brightness VOLUME = 25 ; beeper volume