;--------------------------------------------------------------------------
;
;
;   PEEDI sample target configuration file
;
;   Ronetix
;
;   Supported devices   : RTL81XX
;
;   Revision            : 1.0
;
;   Date                : April 29, 2010
;
; The file is delivered "AS IS" without warranty or condition of any
; kind, either express, implied or statutory. This includes without
; limitation any warranty or condition with respect to merchantability or
; fitness for any particular purpose, or against the infringements of
; intellectual property rights of others.
;
;--------------------------------------------------------------------------

;--------------------------------------------------------------------------
; The following section contains licenses that are required for PEEDI to
; operate. These licenses must be filled before using this file.
; The [LICENSE] section may contain license keys for one or more PEEDIs.
;
;   Example:
;       [LICENSE]
;       KEY         = UPDATE_24MAY2010, 1111-1111-1111-1
;       KEY         = XXXXX, 2222-2222-2222-2
;
; The [LICENSE] section may point to an external file which contains
; license keys for one or more PEEDIs. The external file must include 
; the text [LICENSE] followed by all keys.
;
;   Example:
;		[LICENSE]
;		FILE = tftp://192.168.3.1/license.txt
;		or
;		FILE=eep:license.txt 
;		or 
;		FILE = ftp://user:password@192.168.3.1/license.txt
;
;
; PEEDI is shipped with license keys stored in "eep:license.txt" and 
; printed on a label on the bottom side of PEEDI.
;
[LICENSE]
FILE=eep:license.txt
;--------------------------------------------------------------------------

[DEBUGGER]
PROTOCOL            = gdb_remote    ; gdb remote
REMOTE_PORT         = 2000          ; TCP/IP port

[TARGET]
PLATFORM            = MIPS32        ; platform is MIPS32

[PLATFORM_MIPS32]
JTAG_CHAIN          = 5             ; list of TAP controllers in the JTAG chain
JTAG_CLOCK          = 10000         ; JTAG Clock in [kHz]
TRST_TYPE           = PUSHPULL      ; type of TRST output: OPENDRAIN or PUSHPULL
RESET_TIME          = 0             ; length of RESET pulse in ms; 0 means no RESET
WAKEUP_TIME         = 1000
CORE0               = RTL8100       ; TAP is RTL8100 CPU
CORE0_STARTUP_MODE  = RESET         ; stop the core immediately after reset
CORE0_ENDIAN        = BIG           ; core is little endian
CORE0_BREAKMODE     = SOFT          ; breakpoint mode
CORE0_INIT          = INIT_MIPS     ; init section for AT91SAM7S64 
CORE0_FLASH0        = NOR_FLASH     ; FLASH section parameters
CORE0_WORKSPACE     = 0xA0000000, 0x4000

[INIT_MIPS]


[NOR_FLASH]
CHIP                = MX29LV320DB   ; flash chip
ACCESS_METHOD       = DIRECT        ; program method auto
CHECK_ID            = YES           ; check chip ID
CHIP_WIDTH          = 16            ; chip is in 16 bit configuration
CHIP_COUNT          = 1             ; one chip is used
BASE_ADDR           = 0xBFC00000    ; chip is mapped at 0xBFC00000
FILE                = tftp://192.168.0.1/u-boot.bin, BIN, 0xBFC00000 ; file to program
AUTO_ERASE          = YES           ; erase before program
AUTO_LOCK           = NO            ; lock after program

[SERIAL]                            ; serial port configuration
BAUD                = 115200
STOP_BITS           = 1
PARITY              = NONE
TCP_PORT            = 0
                    
[TELNET]            
PROMPT              = "rtl> "       ; telnet prompt
;BACKSPACE          = 127           ; comment out for autodetect
                    
[DISPLAY]           
BRIGHTNESS          = 20            ; LED indicator brightness
VOLUME              = 25            ; beeper volume
                    
[ACTIONS]                           ; user defined scripts
;AUTORUN            = 2             ; executed on every target connect
1 = prog

[prog]
flash prog