;--------------------------------------------------------------------------
;
;
;   PEEDI target configuration file for PXA303 processor
;
;   Ronetix GmbH
;
;   Supported devices   : Marvell 88AP303 (PXA303)
;
;   Board               : Custom board
;
;   Revision            : 1.0
;
;   Date                : February 2, 2012
;
; The file is delivered "AS IS" without warranty or condition of any
; kind, either express, implied or statutory. This includes without
; limitation any warranty or condition with respect to merchantability or
; fitness for any particular purpose, or against the infringements of
; intellectual property rights of others.
;
;--------------------------------------------------------------------------

;--------------------------------------------------------------------------
; The following section contains licenses that are required for PEEDI to
; operate. These licenses must be filled before using this file.
; The [LICENSE] section may contain license keys for one or more PEEDIs.
;
;   Example:
;       [LICENSE]
;       KEY         = UPDATE_24MAY2010, 1111-1111-1111-1
;       KEY         = XXXXX, 2222-2222-2222-2
;
; The [LICENSE] section may point to an external file which contains
; license keys for one or more PEEDIs. The external file must include 
; the text [LICENSE] followed by all keys.
;
;   Example:
;		[LICENSE]
;		FILE = tftp://192.168.3.1/license.txt
;		or
;		FILE=eep:license.txt 
;		or 
;		FILE = ftp://user:password@192.168.3.1/license.txt
;
;
; PEEDI is shipped with license keys stored in "eep:license.txt" and 
; printed on a label on the bottom side of PEEDI.
;
[LICENSE]
FILE=eep:license.txt
;--------------------------------------------------------------------------

[DEBUGGER]
PROTOCOL    = gdb_remote   ; gdb remote
REMOTE_PORT = 2000         ; TCP/IP port

[TARGET]
PLATFORM    = XScale       ; platform is XScale

[PLATFORM_XSCALE]
JTAG_CHAIN  = 11           ; list of IR length of all TAP controller in JTAG chain
JTAG_CLOCK  = 1000, 8000  ; JTAG Clock in [kHz] - 1MHz JTAG clock for init
                           ; operations and 16MHz for normal work
TRST_TYPE   = PUSHPULL     ; type of TRST output: OPENDRAIN or PUSHPULL
RESET_TIME  = 200          ; length of RESET pulse in ms; 0 means no RESET
WAKEUP_TIME = 30
TIME_AFTER_RESET = 3000

CORE0                   = PXA320, 0  		; TAP is PXA320 CPU
CORE0_STARTUP_MODE      = RESET             ; Stop core
CORE0_BREAKMODE         = SOFT              ; breakpoint mode:
CORE0_INIT              = INIT_PXA303      ; init section for board
CORE0_FLASH             = NAND_FLASH        ; FLASH is NAND
CORE0_ENDIAN            = LITTLE            ; core is little endian
CORE0_VECTOR_CATCH_MASK = 0x00              ; catch data abort exceptions
CORE0_WORKSPACE         = 0x5C020000, 0x20000 ; workspace for FLASH programmer

CORE0_FILE              = "myfile.bin", BIN, 0x00400000 ; default file
CORE0_PATH              = "tftp://192.168.1.1" ; default path

[INIT_PXA303]
break add hard 0x5E007E10   ; set break in ROM code
go                          ; let the ROM code init NAND controller
wait 5000 stop              ; wait for break
break del all

; disable NAND write protect
mem write 0x40E00020 0x00080000
mem write 0x40E00014 0x00080000

[NAND_FLASH]
CHIP                    = NAND_FLASH
CPU                     = PXA3XX
OOB_INFO                = PXA_ECC
FILE                    = test.bin, 0

[SERIAL]                                    ; serial port configuration
BAUD                    = 115200
STOP_BITS               = 1
PARITY                  = NONE
TCP_PORT                = 0 ;2023

[TELNET]
PROMPT                  = "pxa303> "        ; telnet prompt
;BACKSPACE              = 127               ; comment out for autodetect

[DISPLAY]
BRIGHTNESS              = 20                ; LED indicator brightness
VOLUME                  = 25                ; beeper volume